Industrial Valves, Strainers & Expansion Joints in Saudi Arabia
Power Energy supplies industrial valves, strainers and expansion joints from IEVTEK for water, process and utility pipelines in Saudi Arabia. Tell us the line size, pressure rating and fluid, and we will recommend the right valve type.
Resilient Wedge Gate Valves
Butterfly, Check & Globe Valves
We help you choose the valve type, size and pressure rating for your line.
We support installation and troubleshooting so the valve performs as designed.
Send us your application details and we will recommend a suitable model.
Y-strainers protect pumps and equipment from debris in the line.
Rubber expansion joints absorb movement and vibration in piping.
Both can be supplied together with your valves.
We offer comprehensive after-sales support including maintenance guidance and technical follow-up.
Our team ensures proper operation and performance of supplied equipment.
We assist clients with troubleshooting and service requirements whenever needed.
Our focus is long-term reliability and complete customer satisfaction.
Where These Valves Are Used
Valves isolate, regulate and protect the flow in water supply, cooling and process pipework. IEVTEK states that its products serve sectors including oil and gas, chemical, energy and food. Send us your pipe size, pressure rating and fluid, and we will quote a suitable valve.
- ISO 9001:2015 certified manufacturer
- Gate valves from DN40 to DN600
- Ductile iron gate valves with EPDM-coated wedge
- Butterfly, check and globe valves
- Y-strainers and rubber expansion joints
- Technical selection support from our team
Valve and Fitting Types We Supply
IEVTEK’s range covers the main valves for water, process and utility pipelines, plus the strainers and expansion joints that protect them. Here is what each type does and when to use it.
Resilient wedge gate valves
A gate valve opens and closes by lifting a wedge out of the flow path. It is used for full isolation in water distribution and industrial lines, and is normally left either fully open or fully closed, not used to regulate flow. Our flat-body and oval-body gate valves are ductile iron with an EPDM-coated wedge, rated PN16, in sizes from DN40 to DN600.
Butterfly valves
A butterfly valve turns a disc a quarter turn to open or close. It is compact and light, which makes it a common choice for large water, cooling and wastewater lines. We supply lug-type butterfly valves.
Check valves
A check valve lets liquid flow in one direction only, which protects pumps and pipework from backflow. We supply dual-plate and swing check valves. Dual-plate valves are compact and light, while swing check valves are a long-established design for general lines.
Globe valves
A globe valve moves a plug against a seat, which gives good control of flow and tight shut-off. It suits lines where flow must be regulated as well as isolated, though it causes more pressure drop than a gate or butterfly valve. We supply flanged globe valves.
Y-strainers
A Y-strainer catches debris in the line with a mesh screen before it reaches a pump, meter or valve. It is usually fitted on the suction side of a pump, and the screen should be cleaned regularly because a blocked screen raises pressure drop.
Rubber expansion joints
A rubber expansion joint absorbs pipe movement, vibration and small misalignment, and reduces noise carried through the piping. It is often fitted next to pumps and at equipment connections. The joint must be matched to the line pressure, temperature, fluid and movement, so please send us the details.
Valves for Pump Systems
A typical pump station uses a strainer on the suction line, an isolation valve on each side of the pump, and a check valve on the discharge to stop backflow when the pump stops. We supply valves, strainers and expansion joints together with pumps, so the whole line can be matched and quoted by one team. See our centrifugal pumps and positive displacement pumps.
How to Choose the Right Valve
Send us these details and we will recommend a suitable valve.
- Duty: isolation, flow regulation, or prevention of backflow.
- Size and pressure: the pipe size (DN) and pressure rating (PN).
- Fluid: water, chemical or other liquid, its temperature, and whether it carries solids.
- Connections: flanged, lug or other end type.
- Material and standards: body and seat material, and any datasheet or project specification.
Our standard gate valves are ductile iron and rated PN16. If you need another rating or material, send us the specification and we will confirm what the manufacturer can supply.
Industrial Valves FAQ
The main types are gate, globe, ball, butterfly, check and plug valves. Each suits a different job: isolation, flow regulation or preventing backflow.
Match the body and seat material to the fluid, temperature and pressure. Stainless steel and special alloys suit corrosive services, while cast iron and carbon steel suit general water and utility use.
A ball valve gives tight shut-off and low pressure drop in smaller line sizes. A butterfly valve is lighter and cheaper in large pipe sizes and is common for water and wastewater lines.
Oil and gas, petrochemical, water and wastewater, power generation, desalination and general process plants all use them.
Valve type, size, pressure class, end connections, body and trim material, the fluid and its temperature. A datasheet or tag number speeds things up.
Email sales@powerenergy.com.co with your valve specification, or use the WhatsApp button on this page. We will confirm availability and send a quotation.
A gate valve is for on and off isolation and causes little pressure drop when fully open. A globe valve is for regulating flow and gives tighter control, but it causes more pressure drop.
Normally on the discharge line, after the pump and before the isolation valve, so liquid cannot flow back through the pump when it stops.
It catches debris in the line with a mesh screen, protecting pumps, meters and valves. The screen needs regular cleaning so it does not block.
Our IEVTEK resilient wedge gate valves are ductile iron with an EPDM-coated wedge, rated PN16, in sizes from DN40 to DN600. For another rating or material, send us the specification and we will confirm with the manufacturer.

