Supply of Industrial Heat Exchangers
Power Energy Gulf offers Flovex heat exchangers to industrial plants across Saudi Arabia and the GCC. Flovex is an Italian manufacturer founded in 1977, with a standard range of exchangers for hydraulic and process cooling, and custom-engineered units for oil and gas, compressors, turbines, biogas and energy recovery.
Tell us the fluids, flow rates, temperatures and pressures, and we will help you select a standard model or arrange an engineered design.
Standard Heat Exchangers
Engineered Heat Exchangers
Tube materials include stainless steel, carbon steel, brass and cupronickel, with Monel for special conditions. Engineered units can also use copper alloys such as Admiralty, Naval Brass and Aluminium Brass, as well as titanium, duplex and superduplex stainless steel and AISI 904.
Tubes are available smooth or fully finned, which reduces the size of the exchanger and the cooling water needed.
Flovex manufacturing is certified to ISO 9001, holds the ASME U stamp with National Board registration, and is assessed under Module H of the EU Pressure Equipment Directive (2014/68/EU).
Engineered exchangers are designed and built to TEMA, and Flovex works with third-party inspection bodies including Bureau Veritas, DNV, TUV, Lloyd's Register and Intertek.
Oil and gas, compressors, turbines, pumps, hydraulics, transformers, thermoelectric plants, biogas, energy recovery and naval applications.
Typical duties include lube and hydraulic oil cooling, gas cooling, condensing and safety cooling on process and rotating equipment.
We help you select the right exchanger from your process data, check materials against the fluids, and prepare the enquiry for a standard or engineered unit.
Send us the duty details and we will come back with a recommendation and offer.
Why Choose Flovex Heat Exchangers
Flovex has designed and built heat exchangers for more than 40 years, and has delivered over 3,000 exchangers for API applications. Power Energy Gulf supports your selection and enquiry from the Gulf.
- Over 40 years of heat exchanger experience
- ISO 9001, ASME U stamp and PED certified manufacturing
- Standard range and custom-engineered units
- TEMA-based design for high pressure and temperature
- Materials from carbon steel to titanium and superduplex
- Local support from Power Energy Gulf in KSA and the GCC
Heat Exchanger Types We Supply
Flovex builds shell and tube heat exchangers in several forms. Here is what each type does and where it is used.
Shell and tube heat exchangers
One fluid flows through the tubes and the other around them in the shell, so heat passes from one to the other without the fluids mixing. Shell and tube units handle high pressures, high temperatures and dirtier fluids well. Flovex makes them in fixed bundle, extractable bundle, floating head and U-bundle designs, with smooth or finned tubes.
Oil coolers for hydraulic and lube oil systems
An oil cooler removes heat from hydraulic or lubricating oil, so the oil stays at the right temperature and the machine it serves lasts longer. Typical uses are hydraulic systems, compressors, turbines, pumps and transformers. See also our compressor auxiliary systems.
Air coolers and condensers
An air cooler passes hot fluid through finned tubes and cools it with ambient air, which saves cooling water. A condenser turns a vapour back into a liquid. Flovex designs both as engineered units for oil and gas, gas and biogas duties.
Double tube safety coolers
A double tube design adds a second barrier between the two fluids. It is used where mixing the fluids in a leak would be dangerous or costly, such as oil cooled by water.
Finned tubes
Fins add heat transfer surface to the outside of the tube. This reduces the size of the exchanger and the amount of cooling water needed.
Heat Exchangers for Compressors, Turbines and Oil Systems
Compressors, turbines and pumps all produce heat that must be removed. Lube oil coolers keep bearings and gearboxes at a safe temperature, and gas coolers bring compressed gas back down between stages or after the final stage. In the Gulf, high ambient and seawater temperatures make correct sizing and tube material especially important. Flovex has delivered more than 3,000 exchangers for API applications, and its engineered units are built to TEMA with ASME and PED certified manufacturing. See our gas treatment systems for related equipment.
How to Choose a Shell and Tube Heat Exchanger
Send us these details and we will help you select a standard model or arrange an engineered design.
- Heat duty: how much heat must be removed or added.
- The two fluids: their names, flow rates, and inlet and outlet temperatures.
- Pressure: design pressure on each side and the pressure drop you can accept.
- Cooling medium: fresh water, seawater, brackish water or air. Seawater needs tube materials such as cupronickel, titanium or duplex stainless steel.
- Standards: TEMA, ASME or PED, and any third-party inspection requirement.
- Space and connections: available footprint and the pipe connections you need.
For a deeper look at the designs, read our guide Types of Heat Exchangers: Shell and Tube Designs Explained.
Heat Exchanger FAQ
A heat exchanger transfers heat from one fluid to another without letting the two fluids mix. It is used to heat, cool, condense or recover heat in industrial processes.
The common types are plate, shell and tube, and brazed plate exchangers. Plate types are compact and efficient, while shell and tube suits high pressure and temperature.
A plate exchanger uses stacked corrugated plates, gives high efficiency in a small footprint and is easy to expand or clean. A shell and tube exchanger handles higher pressures, temperatures and dirtier fluids.
Process cooling and heating, HVAC and chillers, power plants, oil and gas, chemical processing, desalination and heat recovery systems.
Heat duty, the two fluids, inlet and outlet temperatures, flow rates, allowable pressure drop and design pressure. A datasheet speeds up the quote.
Email sales@powerenergy.com.co with your duty and fluid details, or use the WhatsApp button on this page. We will recommend a unit and send a quotation.
An oil cooler removes heat from hydraulic or lube oil so it stays within its working temperature. You need one when the oil heats up faster than the machine or tank can shed heat, for example on compressors, turbines and hydraulic units.
A water-cooled exchanger uses cooling water, which gives compact units but needs a water supply. An air cooler uses ambient air through finned tubes, which saves water but needs more space and works less well in very hot weather.
Cupronickel, titanium and duplex stainless steels are commonly used for seawater. The right choice depends on the water quality and temperature, so send us the water analysis and we will check the materials.
TEMA is the standard from the Tubular Exchanger Manufacturers Association that sets design and construction rules for shell and tube exchangers. Flovex designs its engineered exchangers to TEMA.

